一、紙張外表越粗糙，油墨的吸收量就越大。打印紙的粗糙外表，油墨泛濫現象更容易出現。這是因為有些紙張纖維的交織發生的間隙，均勻的涂層還沒有很好的覆蓋。這種壓紋紙和印版時，油墨層外表發生不良接觸。如果通過適當的印刷壓力，可以有足夠的接觸時間與油墨層的布局的紙張的平滑性差，實現均勻的壓印接觸，可以確保印刷墨層均勻平服。
1、 The rougher the paper surface, the greater the ink absorption. The rough surface of printing paper and the overflow of ink are more likely to occur. This is because some paper fibers are interlaced and the uniform coating has not been well covered. When the embossing paper and the printing plate are used, the surface of the ink layer is in bad contact. If the printing pressure is appropriate, there can be enough contact time and the smoothness of the paper with the layout of the ink layer is poor, so as to achieve uniform embossing contact, which can ensure that the printing ink layer is uniform and flat.
二、保守膠合板面前底部支架的印刷版，不只有許多弊端，容易呈現油墨轉移不良現象，引起油墨布局不均的發生。這是因為木材的底部托盤不夠強，變形的可能性也比較大，導致不穩定的印刷壓力，油墨層的布局不能均勻地轉印到紙張上。好的方法就是做好備份操作技術，一些印刷板面積較大，應選擇一些平整度好，比擬扎實的金屬版本的護理，可以更好的防止這些現象的發生。
2、 The printing plate of the bottom bracket in front of the conservative plywood has not only many disadvantages, but also is prone to poor ink transfer, causing uneven ink layout. This is because the bottom tray of wood is not strong enough, and the possibility of deformation is also large, leading to unstable printing pressure, and the layout of the ink layer cannot be uniformly transferred to the paper. A good way is to do a good job in backup operation technology. Some printed boards have a large area, so you should choose some with good flatness, which is comparable to the solid metal version, to better prevent these phenomena.
彩色印刷品在設計和疊印的處理上要注意以下六點：
The following six points should be paid attention to in the design and overprint of color prints:
1、字形過小的文字應避免選擇筆畫太細的字體，比如仿宋體、細圓體等，字體的筆畫原本就細，如果字形過小，印刷時筆畫就容易丟失，導致字跡不全；
1. For characters with too small font size, avoid choosing fonts with too thin strokes, such as imitation Song typeface and thin round typeface. The strokes of fonts are originally thin. If the font size is too small, the strokes will be easily lost during printing, resulting in incomplete handwriting;
2、尤其是細小的文字，應避免使用多色套印；
2. Especially for small words, multi-color overprint should be avoided;
3、盡量避免使用細小的反白文字；
3. Try to avoid using small inverted words;
4、細小的文字應避免疊印在深色的背景上；
4. Small words should not be overprinted on the dark background;
5、細小的文字應避免使用金墨、銀墨印刷，金墨、銀墨的顆粒比一般油墨粗，用于印刷細小的文字時，容易導致字跡模糊等問題；
5. The printing of small characters should avoid using gold ink and silver ink. The particles of gold ink and silver ink are thicker than ordinary ink, which may lead to problems such as illegibility when used to print small characters;
6、盡可能采用疊印方式在底色上印文字和圖片，而不用在底色版上挖空的方式。
6. As far as possible, use the overprint method to print words and pictures on the background instead of hollowing out the background plate.
在彩色印刷品設計印制時注意這些問題，可防止后面發生很多不必要的浪費，還可呈現給客戶精美的印品，何樂而不為呢。
Pay attention to these problems when designing and printing color prints, which can prevent a lot of unnecessary waste later, and also present beautiful prints to customers. Why not.
The above is a detailed introduction of Jinan color design and printing for you. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.zhouyingzi.cn/
